Characteristics of fishbone patterned conveyor belts and raised grain patterned conveyor belts

The fishbone striped conveyor belt made of rubber material is relatively strong and durable, with various models and standard sizes. It is necessary to have a certain selection of the number of products according to the environment of use. The service life is reduced, the cost is reduced, the use time is prolonged, and the frequency of replacement is effectively reduced. When operating, use it strictly according to the instructions for use.
The fishbone striped conveyor belt is easy to maintain and maintain, easy to clean and use. If the operation is improper, it is easy to continue the damage or breakage of the patterned conveyor belt. When starting to use, it needs to be empty to see if there are various faults. Or the problem of noise, to avoid various failures during use, and there is no problem in the test, you can use it.
The fishbone striped conveyor belt is good in terms of appearance, transportation capacity, anti-skid ability, etc. After all, it is convenient for construction, and can not be stacked together when maintaining to avoid deformation of the rubber conveyor belt due to excessive heat and other reasons. ask him, so it's not standard. Can not be exposed to direct sunlight when kept, reducing the transportation capacity. prone to breakage.

The structural principle of the convex grain pattern conveyor belt is that it is convenient to store after use. Because of the different environments of use, their application methods are different to some extent, and they need strict certain standards for operation or production, so in terms of price, It will be different from ordinary pattern belts. Relatively speaking, it is a little expensive. When we buy pattern belts, we need to fully understand its structure to facilitate later operation.
Conveyor belt with embossed grain pattern belongs to the series of rubber conveyor belts. The structure generally includes a combination of upper and lower covering glue, pattern and base belt. We need to comply with relevant principles when using it and avoid storing it in a humid environment. , or stored or used in an environment with acid and alkali resistance, to avoid the occurrence of various problems caused by the breakage of the embossed pattern conveyor belt or due to improper storage, and to reduce the effect of reducing the compression resistance of the pattern conveyor belt.
When we use this rubber belt, we need to fully understand their use, the angle of transportation, etc. According to different transportation conditions, there are gaps in the angle they use. The materials to be transported include granular, small particles and other materials. , select the pattern belt with open C ] or close C ], and understand according to the specific situation.